JVC HR-S7722EU 사용자 설명서

Masterpage:Right

Filename [HRS7700EU2.fm]

Page 35

March 8, 2000 1:33 pm

EDITING

Edit From A
Camcorder

You can use a camcorder as the source player and your
recorder as the recording deck.

Make connections.

A If the camcorder has no S-VIDEO output connector ...

... connect the camcorder’s AUDIO OUT and VIDEO
OUT connectors to the recorder’s front panel AUDIO
and VIDEO input connectors.

B If the camcorder has an S-VIDEO output connector ...

... connect the camcorder’s AUDIO OUT and
S-VIDEO OUT connectors to the recorder’s front panel
AUDIO and S-VIDEO input connectors.

● When using a monaural camcorder, connect its AUDIO OUT

connector to the AUDIO L input connector on your recorder.

● When a Master Edit Control-equipped JVC camcorder is used,

the camcorder is capable of controlling the recorder. Refer to
the camcorder’s instruction manual for operating procedure.

Set the recorder’s input mode.

Press AUX (NUMBER key “0”) and/or PR to select “F-1”
for the AUDIO and VIDEO input connectors, or “S-1” for
the AUDIO and S-VIDEO input connectors, depending
on the connectors being used.

Set the edit mode.

See “PICTURE CONTROL” on page 49.

Start the camcorder.

Engage the Play mode of the camcorder.

Start the recorder.

Engage the Record mode of the recorder.

NOTES:

● All necessary cables can be obtained from your dealer.

● When you select “EDIT” to dub tapes in step 3, be sure to

select “AUTO” (or “NORM” when “B.E.S.T.” is set to “OFF”)
after you finish dubbing the tapes.

If the camcorder has no S-VIDEO output connector ...

If the camcorder has an S-VIDEO output connector ...

Your recorder

Audio cable (not provided)

VIDEO OUT

AUDIO OUT

Camcorder

VIDEO
input

Player

AUDIO input

EDIT

Video cable (not provided)

Mini-plug cable
(not provided)
(JVC camcorder
only)

To rear panel
PAUSE connector

Your recorder

Audio cable (not provided)

S-VIDEO OUT