JVC HR-S9600EU 사용자 설명서

B. E. S. T.

=LP TIMER OFF

5∞] = 

Set "AV2 SELECT" to the appropriate mode depending on the type of unit connected to the
rear panel AV2 IN/DECODER connector of this recorder.

1

Press MENU to access the Main Menu screen.

2

Press 

%fi to move the highlight bar (pointer) to "MODE SET", then press OK or 

#

.

3

Press 

%fi to move the highlight bar (pointer) to "AV2 SELECT".

4

Press OK or 

#

 to select "AV2", "DECODER" or "SAT".

a–AV2

: To use this recorder as the recording deck with the player connected to the

AV2 IN/DECODER connector, or to use the satellite tuner connected to the
AV2 IN/DECODER connector.

b–DECODER : To use a decoder connected to the AV2 IN/DECODER connector.
c–SAT

: To view a satellite programme with the TV set while the recorder is in Timer

mode, in Stop mode, recording or turned off. (

Z

 pg. 51)

5

Press MENU to return to normal screen.

● If you have a decoder connected to the AV2 IN/DECODER connector, be sure to set "AV2

SELECT" back to "DECODER" after editing.

● If you're not connecting a decoder to the AV2 IN/DECODER connector, leave "AV2 SELECT"

set to "AV2".

● The default setting is "AV2"; if the recorder's memory backup has expired due to a power cut

or because the AC was removed from the recorder, "AV2" will be automatically selected when
the power is restored to the recorder. If you are using a decoder, be sure to set "AV2 SELECT"
back to "DECODER".

● If the AV1 OUT switch on the rear panel is set to Y/C, it is impossible to set "AV2 SELECT" to

"DECODER".

5∞] = 

B. E. S. T.

=LP TIMER OFF

5∞] = 

Set "AV1 SELECT" to the appropriate mode depending on the type of unit connected to the
rear panel AV1 IN/OUT connector of this recorder.

1

Press MENU to access the Main Menu screen.

2

Press 

%fi to move the highlight bar (pointer) to "MODE SET", then press OK or 

#

.

3

Press 

%fi to move the highlight bar (pointer) to "AV1 SELECT".

4

Press OK or 

#

 to select "VIDEO" or "S-VIDEO".

a–VIDEO

: If a connected device's output is compatible only with regular video signals,

set "AV1 SELECT" to "VIDEO".

b–S-VIDEO

: If a connected device's output is compatible with Y/C signals, set "AV1

SELECT" to "S-VIDEO".  This setting will let you take advantage of higher-
quality S-VHS pictures.

5

Press MENU to return to normal screen.

● If "AV2 SELECT" is set to "DECODER", it is impossible to set "AV1 SELECT" to "S-VIDEO".

5∞] =