JVC HR-VP780U 사용자 설명서

TIMER RECORDING (cont.)

You can directly program the VCR’s timer to record up to
8 broadcasts, as far as a year in advance. Remember, the
clock must be set before you can program the timer (

墌

pg. 8 or 10).

Load a cassette

Make sure the record safety tab is intact. If not,
cover the hole with adhesive tape, then load it
into the VCR.
● The VCR turns on, and the counter is reset,

automatically.

Access VCR PLUS+ screen

Press PROG..

Access Program screen

Press START +/– once.
(If no program is stored,
“PROGRAM 1”
appears.)

Set program start time

Press START +/–
repeatedly to enter the
time you want
recording to start.
● Press and hold START

+/– to increase the
time in 30-minute
intervals.

Set program stop time

Press STOP +/– repeatedly to enter the time you
want recording to stop.
● Press and hold STOP +/– to increase the time in

30-minute intervals.

Set program date

Press DATE +/–. (The current date is displayed on
the screen. The date you enter appears in its
place.)

Set channel number

Press CH +/–.
● If you are using a DBS receiver, see

“ATTENTION FOR DBS RECEIVER USERS” on
next page.

● Holding down CH +/– rapidly changes the

channel numbers.

Express Timer
Programing

Turn on the VCR and the TV, and select the VCR
channel 3 or 4 (or AV mode) on the TV.

PROGRAM 1

START

STOP

8:00 AM

= – –:– –AM

DATE

– –/– –/– –

– – –

PRESS (+/–, SP/EP, 8=DAILY,

9=WEEKLY), THEN (0K)

PRESS (PROG.) TO END