JVC SR-VS30E 사용자 설명서
Filename [SR-VS30E_3-EN.fm]
Masterpage:Left
48
EN
Page 48
February 1, 2002 3:27 pm
EDITING (cont.)
Edit From A
Camcorder
Camcorder
You can use a camcorder as the source player and your
recorder as the recording deck.
You can perform digital dubbing if you connect a device
such as a camcorder which has a DV IN/OUT connector.
Because the signals are digital, there is no loss of video or
audio quality as a result of editing.
recorder as the recording deck.
You can perform digital dubbing if you connect a device
such as a camcorder which has a DV IN/OUT connector.
Because the signals are digital, there is no loss of video or
audio quality as a result of editing.
A
Make connections.
A If the camcorder has no S-VIDEO output connector ...
... connect the camcorder’s AUDIO OUT and VIDEO
OUT connectors to the recorder’s front panel AUDIO
and VIDEO input connectors.
OUT connectors to the recorder’s front panel AUDIO
and VIDEO input connectors.
B If the camcorder has an S-VIDEO output connector ...
... connect the camcorder’s AUDIO OUT and
S-VIDEO OUT connectors to the recorder’s front panel
AUDIO and S-VIDEO input connectors.
S-VIDEO OUT connectors to the recorder’s front panel
AUDIO and S-VIDEO input connectors.
C If the camcorder has a DV IN/OUT connector ...
... connect the camcorder’s DV IN/OUT connector to
the recorder’s DV IN/OUT connector.
the recorder’s DV IN/OUT connector.
● When using a monaural camcorder, connect its AUDIO OUT
connector to the AUDIO L input connector on your recorder.
● When a Master Edit Control-equipped JVC camcorder is used,
the camcorder is capable of controlling the recorder. Refer to
the camcorder’s instruction manual for operating procedure.
the camcorder’s instruction manual for operating procedure.
B
Set the recorder’s input mode.
Press AUX (number key “0”) and/or PR to select “F-1”.
● When using the VHS deck as the recording deck, set “VHS F-1
INPUT” to “VIDEO” for the AUDIO/VIDEO input connectors,
or “S-VIDEO” for the AUDIO/S-VIDEO input connectors,
depending on the connectors being used (
or “S-VIDEO” for the AUDIO/S-VIDEO input connectors,
depending on the connectors being used (
墌
pg. 53).
C
Select the recording deck.
Press VHS or DV.
● To edit from a camcorder to the VHS deck through the DV IN/
OUT connector, press
.
● To edit from a camcorder to the DV deck through the S-VIDEO
(VIDEO)/AUDIO input connectors, press
.
D
Set the edit mode. (VHS deck only)
See “PICTURE CONTROL” on page 70.
E
Start the camcorder.
Engage the Play mode of the camcorder.
F
Start the recorder.
Engage the Record mode of the recorder.
1
2
3
4
5
6
7
8
9
1
2
1
2
3
0
3
4
4
SR-VS30E_1-EN.book Page 48 Friday, February 1, 2002 3:35 PM