Samsung AQ12FAN 사용자 설명서
E
-
8
Selecting the Automatic Operating Mode
You can start the air conditioner in Auto mode from your remote
control. In the Auto mode, the cooling and heating operation is
selected automatically. You can also raise or lower the temperature
and the fan speed in the Auto mode.
1
If necessary, press the
button.
Result:
The operation indicator on the indoor unit lights up.
The air conditioner starts up in the mode selected
when the unit was last used.
The indoor unit beeps.
The air conditioner starts up in the mode selected
when the unit was last used.
The indoor unit beeps.
IM
PORTANT The air conditioner is fitted with a protection mechanism
to prevent the unit from being damaged when it is started
immediately after being:
immediately after being:
Plugged in
Stopped
lt will start up normally after three minutes.
2
If the
is not displayed at the top of the remote control,
press the
button on the remote control one or more times until it
appears.
Result:
The indoor unit beeps each time you press the
button.
The air conditioner runs in the Auto mode.
The Auto mode cools and heats the room in optimum
condition by adjusting the indoor temperature
depending on the set temperature.
depending on the set temperature.
The mode may change from cooling into heating,
from heating into cooling depending on the current
temperature during operation.
temperature during operation.
Note
You can change modes at any time.
3
To adjust the temperature, press the
button one or more times until
the required temperature is displayed.
Possible temperatures are between 16°C and 30°C inclusive.
Possible temperatures are between 16°C and 30°C inclusive.
Result:
Each time you press the
button:
- The temperature is adjusted by 1°C
- The indoor unit beeps
- The indoor unit beeps
DB98-26492A(1)-E-1.indd 8
2006-9-22 9:57:04
Get user manuals:
See SafeManuals.com