Samsung SVR-440 사용자 설명서

. REMOTE CONTROLLER ID : Set the remote control ID. If you select 0, it appears R:A on the

screen and user can control all the DVRs by using only one remote controller

4.7 NETWORK & SERIAL SETUP

This is a set up menu related to Network and RS-485/422. Press the MENU button and select

the Tab by using the Left/Right button. Then, the submenu related to Network and serial

communication appears as illustrated below. Press button and select the submenu by using

the Left/Right button. Next, press button again, and you can select setup items by using the

Up/Down button.

4.7.1 NETWORK

Set the necessary items for network connection to a computer.

. NETWORK TYPE [ADSL/LAN/DHCP] :

Selects the network types connected to a computer.

. IP ADDRESS:

Enters [IP ADDRESS] that the relevant Internet service provider assigns to a user.

. SUBNET MASK:

Enters [SUBNET MASK] address that the relevant Internet service provider

assigns to a user.

. GATEWAY:

Enters [GATEWAY] Address that the relevant Internet service provider assigns to a

user.

. DNS:

Enters [DNS] address that the relevant Internet service provider assigns to a user.

. ID:

Enters a User ID registered within the relevant service provider.

. PW:

Enters a User Password registered within the relevant service provider.

. DDNS SERVER ON/OFF:

When DVR is connected to dynamic IP, the IP address changes every

time it attempts to connect to ISP. In this case, there is no way for a user

to know the changed IP address. If DVR that uses a dynamic IP address is

registered with its domain name, the domain name can be easily found

and can be connected even if the IP changes.