Maxtor AVE MVDR-5000 사용자 설명서

 

63

 

 

No hard-disk detected after power activated 

Suggest change the battery and reset the system 
time 

System Boot up 

Video loss 

Video input source 

Key lock function is on 

Key lock function is off 

BACKUP n1/n2 NOW 

Backup complete 

HD2 has not enough space for backup 

No backup is possible. 

Backup incomplete, since the user has pressed 
the STOP button to stop it 

The system cannot find a video in the Search 
function. 

Playback of recorded video has reached the end 
point 

Hard-disks are full; this happens only when the 
DISK FULL item in the setup menu is set to 
STOP. 

The user presses the PLAY button or uses the 
SEARCH function, but no video can be played. 

System has to be set to NTSC, please reboot 
(PAL is similar) 

Software update 

The system should be rebooted after the software 
has been updated 

The user has pressed the Save key without 
putting in an SD card, or there is a disk error.   

The system finds data in installed HDs cannot be 
used contiguously. Suggest you remove HD2 
from the system. 

HD2 has been attached. 

HD2 has been removed. 

The chassis fan has stopped for over 30 seconds.

There has been a hard-disk error during 
recording, where n is the hard-disk number and 
xxxxx is the hexadecimal location. 

When the user tries to clear a disk that was not 
attached in the setup menu. 

Start saving to the JPEG file. 

Save to Fnnn. JPG (where nnn= 0..999) 

Saving to the JEPG is ok. 

An SD card is write-protected; or, there is an error