Maxtor 4Channel Stand-alone DVMR 사용자 설명서

47

CHAP. 6  Network Setup

How do I  “ PING” an IP address ?

1. Open an MS-DOS (or Command) prompt
2. At the prompt type – “ping xxx.xxx.xxx.xxx” (without the quotes and replace the x’s with an   IP 

address)

3. Press Enter

Ping Result.  When testing for a usable IP address, verify that you get a “Request timed out”

message. This ensures that the IP address that you have tested is not being used by another 

device on your network.

Windows 98/Me : Start -> Programs -> Accessories -> MS-DOS prompt
Windows 2000/XP : Start -> (All) Programs -> Accessories -> Command Prompt