Maxtor Built in Digital Video Recorder 사용자 설명서

13

CHAP. 4   Operation

ENTER PASSWORD : _ _ _ _ _ _ _ _

INPUT YOUR OWN PASSWORD

TO EXIT, PRESS [MENU]

1) After recognition to Hard Disk Drive was installed, 

press the [MENU] button.

2) Enter password with channel number button

from No.1 to No.10 on the front of the Built in DVR.
(Maximum of  8 digits are available)

3) After inputting the password, press the [ENTER] button.

Administrator : 
If the password entered matches previously set password, “ LOGIN ADMIN” message appears and 
you can enter into SYSTEM SETUP.
If the password entered does not match previously set password, the DVR unit goes back to live 
display mode.

Factory default password is blank. For log-in, just press [MENU] button and then [ENTER] button.

-Factory default password 

ADMIN : (Blank)
MANAGER : ‘ 1 ’
USER 1~USER8 : ‘ 2 ’ ~ ’ 9 ’

※ We recommend configuring a unique password as per the procedure in 

SYSTEM MENU - CONFIGURATION - PASSWORD SETUP.

※ For security reasons, be sure to make note of your own password.

Before first operation, you must  set Time/Date, set FACTORY DEFAULT, and then clear 
HDD, even though it is brand new one. It is to make DVMR system and HDD ready for 
proper operation. Starting recording without FACTORY DEFAULT setting and HDD clear will 
cause malfunction.

2. FACTORY DEFAULT

1. HDD CLEAR