Uniden BC95XLT 사용자 설명서

41

To turn on the Close Call feature, press Func + 

C

 

once except in WX search, band select, or program 
mode. 

C

 appears. Every 2 seconds, the scanner 

checks for frequencies in the range you specified in 
“Setting the Close Call Options” on Page 38, if it 
isnot already stopped on a transmission.

Notes: 

•

Set the squelch tight (where only strong signals 
are received) while using Close Call.

•

To continue scanning normally while the Close 
Call feature is working, simply press Scan twice.

When the scanner finds a frequency, it sounds the 
alert you specified in “Setting the Close Call 
Options” on Page 38, and Found flashes. Press any 

key to confirm the displayed frequency. Press Scan 
to resume scanning. Or press   or    while the 

 

frequency and 

f

 appear to select the band where 

you are searching.

To turn on the Close Call feature and turn off normal 
scanning, press Func + 

C

 twice. 

C

 flashes. 

 

To turn off Close Call and turn on normal scanning, 
press Func + 

C

 three times. 

C

 disappears.

This feature lets you search through preset 

 

frequency ranges. You can also change each range 
to a range you set. There are three modes within 
this feature: chain search mode, chain search hold 
mode, and program band select mode.