Uniden BC95XLT 사용자 설명서

47

1. Press Hold to stop the search.
2. Press Func +   or Func +   to select the 

 

frequency. 

 appears.

3. Press Func + L/O. 

 disappears.

To clear all the skip frequencies at once while 
searching or search hold, press Func then press 
and hold L/O until the scanner beeps.

Notes:
•

If you selected all frequencies to be skipped 
within the search range, the scanner beeps 3 
times and does not search.

•

If you select more than 50 frequencies to skip, 
each new frequency replaces a frequency 

 

previously stored, beginning with the first stored 
frequency.

•

Press Func +   or Func +   to select a 
skipped frequency while 

 appears. 

 

appears when you select a skipped frequency.

Sometimes a user might pause before replying to a 
transmission. To avoid missing a reply on a specific 
channel, you can program a 2-second delay into any 
channel or frequency. The scanner continues to 
monitor the channel frequency for an additional 

 

2 seconds after the transmission stops before 

 

resuming scanning or searching. The scanner 

 

automatically sets a delay when you store 

 

frequencies into channels or when you search 

 

frequencies. When the delay feature is on, 

 

appears. If it is off, follow one of these steps to 

 

program a delay depending on how the scanner is 
operating,.