Maxtor WDR-516S 사용자 설명서

 

 

(11) Select “Action” using [▲/▼] button and press [EXIT] button. 

 

(12) Select “Add” using [◄ or ►] button and press [EXIT] button.   

 

(13) Select “Apply” using [▲/▼] button and press [EXIT] button. The HDD status is changed to “[*]”. 

 

(14) Select “Action” using [▲/▼] button and press [EXIT] button. 

 

(15) Select “Format” using [◄ or ►] button and press [EXIT] button.   

 

(16) Select “Apply” using [▲/▼] button and press [EXIT] button. The HDD status is changed to “[R]” 

after formatting. 

 

(17) Shut down “Disk Manager” by pressing [EXIT] button. 

 

 

 

 

 

1.  Available of recording  

2.    [V] Connected and formatted as WDR-516S’s file system 

If using ‘Add used’ command, it will be changed to [R]. There is no need to reformat. 

3.    [F] Connected but not available file system. After using ‘Add’, need to format for making as [R].   

4.    [*] Connected and added using the ‘ADD’ command. If formatting, it will be [R]. 

5.  [X] HDD cable is not 

 

 

 

 

 

1.    Format : Format as WDR-516S’s file system. Not available to PC file system. 

2.    Add : Add HDD for recording. Need to format. 

3.    Add Used : Add a HDD that has been used and formatted. There is no need to reformat 

4.  Remove : Remove current HDD. HDD can be reused without data loss by the ‘Add Used’ 

command. 

5. Confirm Removed : U

sed when a removed HDD is still listed. ALL DATA WILL BE LOST! 

 

 

 

 

 

WDR-516S doesn’t need additional format command. Just do it; ‘Remove’ Æ ‘Add’ Æ ‘Format’.