Parker Hannifin mx80l standard grade 사용자 설명서

 

27 

 

The MX80L can be mounted normal, inverted, side or vertically.  For vertical (z-axis) mounting the 
pneumatic counter balance is recommended to compensate for the effect of gravity on the carriage and 
the load. For all mounting orientations, the cables should be secured as to not interfere with the movement 
of the carriage and bearings. 
 
 

P/N 100-9822-02 QTY.(2)

VERTICAL 

 

 
 
 
 
 
 
 
 

.  
 
 
 
 

SIDE MOUNTED

 

INVERTED 

HORIZONTAL 

With c’balance and z-bracket

 

 

Proper mounting of the MX80L is essential to optimize product performance. All specifications are based 
on the following conditions: 
 

•  The positioner must be bolted down using all counter bored mounting holes provided (4 on T01 & 

T02, 8 on T03 and T04) using M4 socket head cap screws. 

70.0 [2.76]

CENTERED

"E

"E"

70.0 [2.76]

CENTERED

50.0 [1.97]

CENTERED

25.0 [0.98]

CENTERED

C-BORED HOLES ON BASE
FOR M4 X 0.7 X 8.0 LENGTH SOCKET CAP HEAD SCREW

Ø4.008

+0.012-0.000 

[

Ø0.1578

+0.0005-0.

0000

]

 DOWEL PIN HOLES QTY.(2)

BASE

 

 

 T01 

T02 

T03 

T04 

‘E’ n/a  n/a  35.0  65.0 

 

•  The positioner must be mounted to a flat, stable surface, with a flatness error less than or equal to 

0.025mm/300mm for operation (specifications will be greatly varied from published specification).  
To meet catalog specifications the surface must have a flatness error less than or equal to 
0.003mm/300mm for Standard grade and 0.001mm/300mm for Precision grade.  

Daedal Division 
Irwin, Pennsylvania