ZyXEL Communications Vantage Service Gateway VSG-1200 V2 사용자 설명서
VSG-1200 V2 User’s Guide
189
Chapter 28 System Status
28.6 NAT Pool Table
The VSG provides a NAT address pool feature for use with VPN. It allows subscribers to
connect to remote VPN servers that allow only one connection per source IP address.
connect to remote VPN servers that allow only one connection per source IP address.
Click System Status and NAT Pool Table to open the screen shown next. This screen displays
the LAN and WAN IP addresses that are currently being used as well the VPN types.
the LAN and WAN IP addresses that are currently being used as well the VPN types.
Figure 126 System Status: NAT Pool Table
The following table describes the labels in this screen.
28.7 LAN Device Status
The LAN Devices Status screen displays the status of LAN devices configured in the LAN
Devices screen (refer to
Devices screen (refer to
).
Idle
This field displays the number of seconds of inactivity for a session.
Go .. page
Select a page number from the drop-down list box to display the selected page.
First
Click First to go to the first page.
Previous
Click Previous to return to the previous page.
Next
Click Next to go to the next page.
End
Click End to go to the last page.
Table 64 System Status: Session List (continued)
LABEL
DESCRIPTION
Table 65 System Status: NAT Tool Table
LABEL
DESCRIPTION
No
This field displays the index number of an entry.
Source IP Address This field displays the IP address of the subscriber device on the LAN that is using
the VPN.
Source MAC
Address
This field displays the MAC address of the subscriber device on the LAN that is
using the VPN.
Translated IP
Address
This field displays the WAN IP address of the VSG to which the LAN IP address of
the subscriber using the VPN was translated.
VPN Type
This field displays the type of VPN connection that is being used (IPSec or PPTP).