Toshiba 3511 사용자 설명서

- This multifunctional digital colour systems requires 220-240 V AC, 8 A 50/60 Hz electric power. For Saudi 

Arabia 100V version, it requires 100-127 V AC, 12 A 50/60 Hz electric power.
DO NOT use a power supply with a voltage other than that specified.
Avoid multiple connections in the same outlet. This could cause a fire or give you an electric shock. If you 
are considering increasing the number of outlets, contact an electrician.

- ALWAYS connect this multifunctional digital colour systems to an outlet with a ground connection to avoid 

the danger of fire or electric shock in case of short-circuiting. Contact your service representative for the 
details. Be sure to use a 3-conductor, grounded wall outlet.
In areas where a 2-pin plug is used, the multifunctional digital colour systems must be grounded for 
safety. Never ground it to a gas pipe, a water pipe, or any other object not suitable for grounding.

- Plug the power cord securely into the outlet. If it is not plugged in properly, it could heat up and cause a 

fire or give you an electric shock.

- DO NOT damage, break or attempt to repair the power cord.

The following things should not be done to the power cord.
- Twisting it

- Bending it

- Pulling it

- Placing anything on it

- Making it hot

- Situating it near radiators or other heat sources

This could cause a fire or give you an electric shock. If the power cord is damaged, contact your service 
representative.

- When removing the plug from the outlet, DO NOT PULL the power cord. ALWAYS hold the plug when 

removing it from the outlet. If the power cord is pulled, the wires may become broken and this could cause 
a fire or give you an electric shock.

- Make sure that the ventilation holes are not blocked up.

If the temperature within the multifunctional digital colour systems becomes too high, a fire could result.

- DO NOT move the multifunctional digital colour systems to another building, up and down the stairs or 

for any great distance.
This could cause an injury or give you and electric shock. When lifting or moving the multifunctional digital 
colour systems, contact your service representative.

- DO NOT move the multifunctional digital colour systems with optional equipment, such as the finisher, 

attached. This could cause a fire or give you an electric shock. When lifting or moving the multifunctional 
digital colour systems, contact your service representative.

- When moving the multifunctional digital colour systems, be sure to shut down the power prior to pulling 

out the plug from the outlet. If the power cord is damaged, this could cause a fire or give you an electric 
shock.

- The socket outlet should be near the equipment and be easily accessible.
- Pull out the plug from the outlet more than once a year to clean around the prongs. Accumulating dust 

and dirt could cause a fire due to the heat released by electric leakage.