Toshiba 3511 사용자 설명서
86
3.SETTING OF BASIC COPY MODES
4.SELECTING FINISHING MODES (Cont.)
3
Hole Punch Mode (Optional)
When the optional hole punch unit is attached to the finisher (Optional: MJ-1024, MJ-1023), you can hole
punch your copies.
punch your copies.
* The paper weight should be in the range of 64-209 g/m
2
. Special paper such as OHP files or labels is
excluded.
1
Place paper in the drawer(s).
- "1.SETTING COPY PAPER" Page 36
- When using this mode in bypass copying ("Bypass Copying"
- When using this mode in bypass copying ("Bypass Copying"
Page 59), be sure to specify the paper size.
2
Place the original(s).
- "2.SETTING ORIGINALS" Page 45
3
Press the Finisher button on the basic
menu as shown in the illustration on the
right (highlighted).
menu as shown in the illustration on the
right (highlighted).
4
Press the [HOLE PUNCH] button.
z
Select other copy modes as required.
5
Press the [START] button.
Available paper sizes for the hole punch:
Since the number of punch holes and the distance between the
holes vary depending on the country, purchase a hole punch unit
that meets your requirements. (For details, consult your service
technician.)
Since the number of punch holes and the distance between the
holes vary depending on the country, purchase a hole punch unit
that meets your requirements. (For details, consult your service
technician.)