Amiko SSD549 CX RF SSD549CXRF 전단

제품 코드
SSD549CXRF
다운로드
페이지 1
 Digital Satellite Receiver
■ 
Conax Embedded card reader
■ 
Automatic Install function
■ 
4 (7 segment) digit LED display
 Powerful Channel Management tools 
    (Lock, Edit, Move, Skip, Delete)
 Favourites
■ 
User Friendly On-Screen Display (OSD)
■ 
Multi-Language support
■ 
Subtitles support (DVB/TXT)
■ 
DiSEqC 1.0, 1.2 and USALS compatible
Tuner & Demodulation
System standard: Fully MPEGII/DVB Compliant
Input Frequency: 950~2150Mhz
RF Input level: -65~-25dBm
LNB Control: DiSEqC1.0/1.2
LNB Power:13V/18V (Max, 500mA)
LNB tone switch: 22KHZ
Waveform: QPSK (SCPC, MCPC capable)
Symbol rate: 2~45Mbps
A/V Mode
Video format: MPEG-II Main profile/Main level
Audio format: MPEG-II layer I&II
Aspect Ratio: 16:9, 4:3
Audio sampling rate: 32,44.1, 48kHz
Audio Type: Mono Dual Mono, Stereo, Joint stereo
Graphic display: 720x576(PAL), 720x480(NTSC)
Microprocessor & Memories
Processor: 200 MIPS based CPU
RAM: 64Mbits
FLASH: 16Mbits
Power & Environment Condition
Supply Voltage: Free Voltage (100~250V AC, 50/60Hz)
Supply Power: Max.20 W
Stand-By Power: <1W
Operating temp: 5C~45C
Physical Specification
Display: 1 bi-colour LED
Weight: 420g
Dimensions: 200(W) x 130(D) x 45(H)mm
Connectors
Satellite IF input: F-type (Digital)
Satellite IF loop out: 950-2150MHz
1 SCART TV (RGB, CVBS)
RCA/Composite Video(CVBS)/Audio Left & Audio Right
0/12V Output
RS232: 9 way D RS232 DCE serial port
S/PDIF: Optical
Digital Satellite Receiver - Conax Embedded