Tandberg Data Streamer SCSI DLT-V4 External Black 7302 7090 00 사용자 설명서
제품 코드
7302 7090 00
Chapter 4 Using Your Tape Drive
LED Indicators
DLT-V4 Product Manual
49
Cleaning required—250 tape motion
hours exceeded since last cleaning
–
Cleaning in process
User invoked write/read diagnostic
failed
Servo or mechanical error
–
–
Internal firmware error
Key
–
Off
On
Blinking–slow (approximately once per second)
Blinking–medium (approximately twice per
second)
Blinking–fast (approximately three times per
second)
Indicates that the status of this LED does not
depend on the specific tape drive condition. This
means that certain tape drive conditions may result
in a combination of two or more of the LED states
in the chart.
For example, if you need to clean the tape drive
while a DLT1 tape is loaded, both the
Clean
LED
and
Media
LED are on steadily. If an internal
write/read diagnostic fails due to a permanent
write error, both the
Fault
LED and
Clean
LED
blink slowly.
Fault
Clean
Media
Description