ZyXEL Wireless Access Point G1000 91-005-124003B 사용자 설명서

G-1000 User’s Guide

Troubleshooting

137

Table 61   Troubleshooting the Password

I cannot access the 

G-1000.

The Password and Username fields are case-sensitive. Make sure that you enter the 

correct password and username using the proper casing.
Use the RESET button on the top panel of the G-1000 to restore the factory default 

configuration file (hold this button in for about 10 seconds or until the link LED turns 

red). This will restore all of the factory defaults including the password. 

Table 62   Troubleshooting Telnet

I cannot access the 

G-1000 through 

Telnet. 

Refer to the 

Problems with the Ethernet Interface 

section for instructions on checking 

your Ethernet connection.

Table 63   Troubleshooting the WLAN Interface

Cannot access the 

G-1000 from the 

WLAN.

Make sure the wireless card is properly inserted in the G-1000 and the link LED is on.  
Make sure the wireless adapter on the wireless station is working properly.
Check that both the G-1000 and your wireless station are using the same ESSID, 

channel and WEP keys (if WEP encryption is activated).

I cannot ping any 

computer on the 

WLAN.

Make sure the wireless card is properly inserted in the G-1000 and the link LED is on.  
Make sure the wireless adapter on the wireless station(s) is working properly.
Check that both the G-1000 and wireless station(s) are using the same ESSID, 

channel and WEP keys (if WEP encryption is activated).