ZyXEL Wireless Access Point G1000 91-005-124003B 사용자 설명서

G-1000 User’s Guide

Chapter 4 Wizard Setup

41

General Setup contains administrative and system-related information. 

The Domain Name entry is what is propagated to the DHCP clients on the LAN. If you leave 
this blank, the domain name obtained by DHCP from the ISP is used. While you must enter 
the host name (System Name) on each individual computer, the domain name can be assigned 
from the G-1000 via DHCP.

Figure 7   Wizard 1: General Setup

The following table describes the labels in this screen.

Use the second wizard screen to set up the wireless LAN.

Table 5   Wizard 1: General Setup

System Name

It is recommended you type your computer's "Computer name". 
In Windows 95/98 click Start, Settings, Control Panel, Network. Click the 

Identification tab, note the entry for the Computer Name field and enter it as the 

System Name.
In Windows 2000, click Start, Settings, Control Panel and then double-click 

System. Click the Network Identification tab and then the Properties button. 

Note the entry for the Computer name field and enter it as the System Name.
In Windows XP, click Start, My Computer, View system information and then 

click the Computer Name tab. Note the entry in the Full computer name field 

and enter it as the G-1000 System Name.
This name can be up to 30 alphanumeric characters long. Spaces are not 

allowed, but dashes "-" and underscores "_" are accepted.

Domain Name

This is not a required field. Leave this field blank or enter the domain name here 

if you know it.

Next

Click Next to proceed to the next screen.