ZyXEL Wireless Access Point G1000 91-005-124003B 사용자 설명서

G-1000 User’s Guide

Chapter 6 Wireless LAN

51

• Use the Local User Database if you have less than 32 wireless clients in your network. 

The G-1000 uses MD5 encryption when a client authenticates with the Local User 
Database 

The MAC Filter screen allows you to configure the AP to give exclusive access to devices 
(Allow Association) or exclude them from accessing the AP (Deny Association). 

If you hide the ESSID, then the G-1000 cannot be seen when a wireless client scans for local 
APs. The trade-off for the extra security of “hiding” the G-1000 may be inconvenience for 
some valid WLAN clients.

1 Configure the 

ESSID and WEP in 
the Wireless screen. If you configure WEP, you can’t configure WPA(2) or WPA(2)-
PSK. 

2 Use the MAC Filter screen to restrict access to your wireless network by MAC address. 

3 Use the Roaming screen to configure the G-1000 so that in a network environment with 

multiple access points, wireless stations are able to switch from one access point to 
another as they move between the coverage areas.

4 Configure WPA(2) or WPA(2)-PSK in the 802.1x/WPA screen. Configure 802.1x 

wireless client authentication in the 802.1x/WPA screen.

5 Configure the built-in authentication database in the Local User Database screen.

6 Configure the authentication and accounting servers for RADIUS in the RADIUS screen.

The following figure shows the relative effectiveness of these wireless security methods 
available on your G-1000.