ZyXEL Wireless Access Point G1000 91-005-124003B 사용자 설명서

G-1000 User’s Guide

66

Chapter 6 Wireless LAN

Figure 23   Wireless LAN: 802.1x/WPA for WPA-PSK Protocol

The following table describes the labels not previously discussed

Select Authentication Required in the Wireless Port Control field and WPA2 in the Key 
Management Protocol field to display the next screen.

Table 19   Wireless LAN: 802.1x/WPA for WPA-PSK Protocol

Key Management 

Protocol

Choose WPA-PSK in this field.

Pre-Shared Key

The encryption mechanisms used for WPA and WPA-PSK are the same. The only 

difference between the two is that WPA-PSK uses a simple common password, 

instead of user-specific credentials.
Type a pre-shared key from 8 to 63 case-sensitive ASCII characters (including 

spaces and symbols).

WPA Group Key 

Update Timer

The WPA Group Key Update Timer is the rate at which the AP (if using WPA-

PSK key management) or RADIUS server (if using WPA key management) sends 

a new group key out to all clients. The re-keying process is the WPA equivalent of 

automatically changing the WEP key for an AP and all stations in a WLAN on a 

periodic basis. Setting of the WPA Group Key Update Timer is also supported in 

WPA-PSK mode. The G-1000 default is 1800 seconds (30 minutes). 

Apply

Click Apply to save your changes back to the G-1000.

Reset

Click Reset to begin configuring this screen afresh.