ZyXEL Wireless Access Point G1000 91-005-124003B 사용자 설명서
제품 코드
91-005-124003B
G-1000 User’s Guide
Chapter 7 IP Screen
71
7.2 Configuring IP
Click ADVANCED and then IP to display the screen shown next.
Figure 27 IP Setup
The following table describes the labels in this screen.
Table 24 IP Setup
LABEL
DESCRIPTION
IP Address Assignment
Get automatically from
DHCP
Select this option if your G-1000 is using a dynamically assigned IP address
from a DHCP server each time.
Note: You must know the IP address assigned to the G-1000
(by the DHCP server) to access the G-1000 again.
(by the DHCP server) to access the G-1000 again.
Use fixed IP address
Select this option if your G-1000 is using a static IP address. When you select
this option, fill in the fields below.
IP Address
Enter the IP address of your G-1000 in dotted decimal notation.
Note: If you change the G-1000's IP address, you must use the
new IP address if you want to access the web configurator
again.
new IP address if you want to access the web configurator
again.
IP Subnet Mask
Type the subnet mask.
Gateway IP Address
Type the IP address of the gateway. The gateway is an immediate neighbor
of your G-1000 that will forward the packet to the destination. On the LAN, the
gateway must be a router on the same segment as your G-1000; over the
WAN, the gateway must be the IP address of one of the remote node.
Apply
Click Apply to save your changes back to the G-1000.
Reset
Click Reset to begin configuring this screen afresh.