ZyXEL 336M 91-003-192BUN2 사용자 설명서
제품 코드
91-003-192BUN2
ZyXEL P-336M User’s Guide
51
Chapter 4 Advanced
Uplink Speed
This field is not applicable when you select the Automatic Uplink Speed option
above.
Enter a number to manually set the uplink speed for the WAN connection.
Enter a number to manually set the uplink speed for the WAN connection.
Alternatively, select a pre-defined choice from the drop-down list box.
Connection
Type
Select Auto-detect to set the P-336M to automatically detect the Internet connection
type.
Select xDSL or Other Frame Relay Network if the P-336M connects to the Internet
Select xDSL or Other Frame Relay Network if the P-336M connects to the Internet
via a DSL modem.
Select Cable or Other Broadband Network if the P-336M connects to the Internet
Select Cable or Other Broadband Network if the P-336M connects to the Internet
via a cable modem.
Detected xDSL
or Framerelay
Network
This field is applicable when you select Auto-detect in the Connection Type field.
This field displays the name of the detected line connection type.
This field displays the name of the detected line connection type.
Add
StremEngine
Rule
Enable
Select this option to enable this rule.
Name
Enter a descriptive name for identification purposes.
Priority
Specify a priority for the traffic type specified below. Enter a number between 1
(highest) and 255 (lowest).
Protocol
Enter the protocol number or select a pre-defined protocol type from the drop-down
list box.
Source IP
Range
Specify one or a range of source IP addresses in the fields provided. Enter the same
IP address in the to field if you want to specify one IP address.
Source Port
Range
Specify one or a range of source port numbers. Enter the same number in the to field
if you want to specify one source port.
Destination IP
Range
Specify one or a range of destination IP addresses in the fields provided. Enter the
same IP address in the to field if you want to specify one IP address.
Destination Port
Range
Specify one or a range of destination port numbers. Enter the same number in the to
field if you want to specify one destination port.
Save
Click Save to save the settings.
Clear
Click Clear to start configuring this part of the screen again.
StreamEngine
Rule List
Enable
Select this option to activate this rule. Clear this check box to disable this rule without
deleting it.
Name
THis field displays the descriptive name for the rule.
Priority
This field displays the priority level (1 to 255) of this rule.
Source IP
Range
This field displays one or a range of source IP addresses.
Destination IP
Range
This field displays one or a range of destination IP addresses.
Protocol/Ports
This field displays the protocol and port numbers.
Table 19 Advanced: StreamEngine (continued)
LABEL
DESCRIPTION