Tandberg Data Streamer SATA DLT-V4 Internal Black 7301 7092 00 사용자 설명서

Chapter 2  Installing the Tape Drive

Installing the Tabletop SCSI Tape Drive

DLT-V4 Product Manual

7

2

Before you begin, clear a desk or table so that you can unpack the tape 

drive. You also need to select a location near the server or workstation 

that has room for the tape drive to sit without being crowded.

2

Before you do anything else, unpack and inspect the tabletop SCSI tape 

drive for shipping damage. If you notice any damage, report it both to the 

sales representative and to the shipping company immediately.

2

Select a location for the tape drive that is flat, sturdy, level, and close to 

the server or workstation. A desk or tabletop surface is most suitable. 

Regardless of the location you choose for the tape drive, make sure the 

environment is free from dust, cigarette smoke, and excessive 

temperature and humidity. See the DLT-V4 Product Specification for 

acceptable operating temperature and humidity limits.
Be sure to follow these additional guidelines when selecting a location for 

the tape drive:
• Allow at least 6 inches (15.2 cm) behind the tape drive for proper 

cooling.

• Avoid locations near printers or photocopy machines, both of which 

produce paper fiber and other types of dust and airborne 

contaminants.

• Do not place the tape drive on the floor.

If the room in which you are working differs from the 

temperature at which the tape drive was shipped or stored by 

30 ºF (17 ºC) or more, let the tape drive acclimate to the 

surrounding environment for at least 12 hours before opening 

the shipping carton.

Save the packing materials in case you need to move or ship 

the tape drive in the future. You must ship the tabletop tape 

drive in the original (or equivalent) packing materials or you 

will invalidate the warranty.