Tandberg Data Streamer SATA DLT-V4 Internal Black 7301 7092 00 사용자 설명서

Chapter 4  Using Your Tape Drive

LED Indicators

DLT-V4 Product Manual

48

during POST, the 

 LED flashes until the tape drive executes a mid-

tape load, which can take several minutes. As POST completes, the tape 

drive makes a faint buzzing noise for several seconds. The noise 

associated with this activity is normal for this technology and does not 

indicate a problem with the tape drive.

4

During normal operation, the 

 LED displays one of the three 

following states. The 

 LED acts independently of the other LEDs.

Table 13   Ready LED Indicator 
Activity

4

The 

, 

, and 

 LEDs work together to display the status of 

the tape drive.

Table 14   Fault / Clean / Media 
LEDs Indicator Activity

Off

Indicates that there is no power to the tape drive.

On

Indicates that power is on, no data cartridge is 

loaded, or a loaded data cartridge is idle with no 

tape motion.

Blinking

A data cartridge is in the process of loading, or 

there is tape motion on a loaded data cartridge. 

Tape motion includes reading, writing, locating, 

rewinding, calibrating, and so on.

–

Unsupported format, unsupported 

data cartridge type, or damaged data 

cartridge

A DLT1 (DLT VS 80) formatted 

DLTtape IV data cartridge is loaded. 

Represents a read-only or VS160 

formatted cartridge.

–

Calibration error or permanent write/

read error, cleaning suggested