ASUS P8H61-M LK R2.0 90MB0E50-M0EAY0 사용자 설명서

ASUS P8H61-M LK R2.0

1-17

In the future, you may need to install expansion cards. The following sub-sections describe 

the slots and the expansion cards that they support.

Unplug the power cord before adding or removing expansion cards. Failure to do so may 

cause you physical injury and damage motherboard components.

To install an expansion card:
1. 

Before installing the expansion card, read the documentation that came with it and 

make the necessary hardware settings for the card.

2. 

Remove the system unit cover (if your motherboard is already installed in a chassis).

3. 

Remove the bracket opposite the slot that you intend to use. Keep the screw for later 

use.

4. 

Align the card connector with the slot and press firmly until the card is completely 

seated on the slot.

5. 

Secure the card to the chassis with the screw you removed earlier.

6. 

Replace the system cover.

After installing the expansion card, configure it by adjusting the software settings.
1. 

Turn on the system and change the necessary BIOS settings, if any. See Chapter 2 for 

information on BIOS setup.

2. 

Assign an IRQ to the card. 

3. 

Install the software drivers for the expansion card.

When using PCI cards on shared slots, ensure that the drivers support “Share IRQ” or that 

the cards do not need IRQ assignments. Otherwise, conflicts will arise between the two PCI 

groups, making the system unstable and the card inoperable. 

This motherboard supports PCI Express 2.0 x1 network cards, SCSI cards, and other cards 

that comply with the PCI Express specifications. 

This motherboard has a PCI Express 3.0/2.0 x16 slot (at 16x mode) that supports PCI 

Express 2.0 x16 graphic cards complying with the PCI Express specifications.

Intel

®

 3rd generation Core™ processors support PCIe 3.0.