Intel i3-3130M AW8063801111500 사용자 설명서

제품 코드
AW8063801111500
다운로드
페이지 112
Power Management 
48
Datasheet, Volume 1
4.1
Advanced Configuration and Power Interface 
(ACPI) States Supported
The ACPI states supported by the processor are described in this section.
4.1.1
System States
4.1.2
Processor Core / Package Idle States
4.1.3
Integrated Memory Controller States
Table 4-1.
System States
State
Description
G0/S0
Full On
G1/S3-Cold
Suspend-to-RAM (STR). Context saved to memory (S3-Hot is not supported by the 
processor).
G1/S4
Suspend-to-Disk (STD). All power lost (except wakeup on PCH).
G2/S5
Soft off. All power lost (except wakeup on PCH). Total reboot.
G3
Mechanical off. All power removed from system.
Table 4-2.
Processor Core / Package State Support
State
Description
C0
Active mode, processor executing code
C1
AutoHALT state
C1E
AutoHALT state with lowest frequency and voltage operating point
C3
Execution cores in C3 flush their L1 instruction cache, L1 data cache, and L2 cache 
to the L3 shared cache. Clocks are shut off to each core
C6
Execution cores in this state save their architectural state before removing core 
voltage
Table 4-3.
Integrated Memory Controller States
State
Description
Power up
CKE asserted. Active mode.
Pre-charge Power Down  CKE de-asserted (not self-refresh) with all banks closed
Active Power Down
CKE de-asserted (not self-refresh) with minimum one bank active
Self-Refresh
CKE de-asserted using device self-refresh