Elo Touch Solution 19C2 E190551 사용자 설명서
제품 코드
E190551
C-S
ERIES
T
OUCHCOMPUTER
U
SER
G
UIDE
22
Fingerprint Reader (FPR)
You can add a fingerprint reader to the C-Series touchcomputer to any of the three
mounting locations located on the display head top, left, and right. Software
application and drivers can be found in the following directory or on
www.elotouch.com
C:\EloTouchSystems\Peripherals
The fingerprint reader is powered by the USB bus. The reader optically scans the
fingerprint when the user touches the glowing window. Optical technology gives
the highest quality fingerprint scans and reliability.
Fingerprint reader specifications are shown in the table below.
Feature
Specification
Fingerprint reader
DigitalPersona U.are.U
Power supply
5.0VDC +/- 0.25V
Current draw – scanning mode
190 mA (typical)
Current draw – idle mode
140 mA (typical)
Current draw – suspend mode
1.5 mA (typical)
Image resolution
512 dpi
Image color
8-bit gray level
Scan capture size
14.6mm (nominal width) x 18.1mm (nominal length)
Image capture speed
100 ms
USB type
1.0, 1.1, or 2.0
Operating temperature
0 to 40°C
Electrostatic discharge (ESD)
Up to 15kV mounted in case
Part number
E375206
Testing the FPR
4. Double-click the Fingerprint Reader Test icon to start the test application.
5. Place your finger on the fingerprint reader sensor and verify that the image of
your fingerprint is displayed on the application window.