ZyXEL Prestige 202H Plus ISDN Router 91-003-154001B 사용자 설명서

P-202H Plus v2 User’s Guide

Chapter 5 WAN Setup

62

Static IP Address

Select this option to manually configure your ZyXEL Device IP address.

IP Address

Type an IP address to identify your ZyXEL Device on the LAN. 

Dial Out Channel 

Setting

Transfer Type

This field specifies the type of connection between the ZyXEL Device and your 

ISP. Select 64K or Leased.

Multilink

The ZyXEL Device uses the PPP Multilink Protocol (PPP/MP) to bundle multiple 

links in a single connection to boost the effective throughput between two nodes. 

This option is only available if the transfer type is 64K. 
If you set  the transfer type to 64K, select the way you use the PPP Multilink 

protocol. You can either select not to (Off) or always (Always) to bundle multiple 

links in a single connection to boost the effective throughput between two nodes. 

Otherwise, select BOD (Bandwidth on Demand) to add or subtract links 

dynamically according to traffic demand. 

Connection

Nailed-Up 

Connection

Select Nailed-Up Connection when you want your connection up all the time. 

The ZyXEL Device will try to bring up the connection automatically if it is 

disconnected.

Connect on Demand Select Connect on Demand when you don't want the connection up all the time 

and specify an idle time-out in the Max Idle Timeout field.

Max Idle Timeout This value specifies the number of idle seconds that elapses before the remote 

node is automatically disconnected. Idle seconds is the period of time when no 

data is transmitted from your ZyXEL Device. Administrative packets such as RIP 

are not counted as data. 

Budget Control

Budget

This field sets the budget callback time for all the remote dial-in users. The 

default for this field is 0 for no budget control.

Period

This field sets the time interval to reset the above callback budget control.

Apply

Click Apply to save your changes back to the ZyXEL Device.

Cancel

Click Cancel to begin configuring this screen afresh.

Table 8   WAN Setup (continued)