Tandberg Data SATA DLT-V4 Internal Black 7301709200 사용자 설명서

Chapter 2  Installing the Tape Drive

Installing the Internal SATA Tape Drive

DLT-V4 Product Manual

25

Installing the Internal SATA Tape Drive

2

This section contains step-by-step instructions for installing the DLT-V4 

internal SATA tape drive.

2

Installing the tape drive is fast and easy when you follow the instructions 

in this section in the order presented. Complete the following steps, 

covered in the next few sections:

Table 4   Installing the DLT-V4 
Internal SATA Tape Drive — 
Overview

 

1

Unpack and check the tape drive for shipping 

damage.

2

Select a server or workstation that is to host 

the tape drive.

3

Shut down and power off the server or 

workstation that is to host the tape drive. 

Power off all peripheral devices attached to 

the server or workstation.

4

Remove the cover from the server or 

workstation, as explained in the server or 
workstation’s documentation

5

Install a SATA host adapter in the server or 

workstation, if necessary.

6

Install the tape drive in an open drive bay.

7

Connect the SATA cable to the tape drive and 

SATA host adapter.

8

Connect a SATA power cable to the tape 

drive.

9

Secure the tape drive in the selected server or 

workstation.