Tandberg Data SATA DLT-V4 Internal Black 7301709200 사용자 설명서

Chapter 5  Using Data and Cleaning Cartridges

Data Cartridge Use and Care

DLT-V4 Product Manual

55

Figure 18  Loading a DLTtape 
VS1 Data Cartridge

The 

 LED blinks while the tape drive loads the data cartridge. 

When the data cartridge is ready to use, the tape drive illuminates the 

 LED. If the data cartridge is a DLTtape IV written using the DLT1 

(VS80) format, the tape drive also illuminates the 

 LED.

5

To unload a data cartridge from your tape drive, follow these steps:

Press the Unload/Eject button or use your tape backup software to 

unload the data cartridge. The 

 LED blinks while the tape drive 

rewinds the tape.

When the tape drive has rewound the tape, it ejects the data 

cartridge, as shown in 

Remove the data cartridge from your tape drive before 

powering off the tape drive—or the server or workstation 

for an internal tape drive. Leaving a data cartridge in the 

tape drive when power is off can result in data cartridge 

and tape drive damage and may cause data loss because 

the header/catalog data may not be properly written 

before the tape drive loses power.