Philips 1190XD/44 사용자 설명서

C

  For best results rinse the shaving unit by 

running under hot water for a few minutes. 

BE CAREFUL TO TEST WATER FIRST SO AS 

NOT TO BURN OR SCALD HANDS.  

C

  3

  Pull the shaving head holder off the 

bottom part of the shaving unit and rinse 

under hot water for 30 seconds. 

 

  Carefully shake off excess water and let 

the shaving unit air dry.

NOTE: Do not wipe or dry the shaving unit

with a towel or tissue. This could damage the

shaving heads.

C

 

  Push the shaving head holder back onto 

the bottom of the shaving unit. You will 

hear a ‘click’. 

 

  You may also clean the shaving unit and 

hair chamber without water by using the 

supplied brush. 

CAUTION: Keep cleaning solution out of   

  

reach of children. Do not take internally. Avoid  

  

contact with eyes. In case of eye contact,  

  

thoroughly flush with cold water. If irritation   

  

persists, get medical attention.

26

 

 

◗ 

Only use this razor, charging stand, Jet Clean 

System and HQ200 cleaning solution provided 

to charge or clean razor.

 

◗ 

Other Philips Norelco razors DO NOT work 

with this Jet Clean System.

 

◗ 

Empty the cleaning solution canister and   

thoroughly rinse the canister clean with warm  

water every 2 weeks.

 

◗ 

The Jet Clean System thoroughly cleans but   

does not disinfect your razor, therefore, do not  

share razor with others.

 

◗ 

 The charging plug converts 100-240V AC to   

less than 24V DC.

 

◗ 

Place the Jet Clean System on a flat,  stable and 

fluid-resistant surface to avoid any leakage.  Be 

careful not to tip  or move the Jet Clean System 

if it is filled with the cleaning solution.

 

◗ 

To avoid evaporation, do not expose cleaning  

solution to direct sunlight.

 

◗ 

Remove the protective cap from the razor 

before charging or cleaning the razor in the  

Jet Clean System. 

 

◗ 

Use this appliance for its intended household  

use as described in this manual.

  

Place the Jet Clean System on a flat,  level 

surface.

C 

Simultaneously press the buttons located 

on both sides of the Jet Clean System  

(1) and lift the appliance off the Jet Clean 

canister (2).

27

2

1

C

F