Alcatel-Lucent OS9-GNI-U24 사용자 설명서
Alcatel-Lucent
Page 16
OmniSwitch 9000
C
C
M
M
M
M
S
S
l
l
o
o
t
t
L
L
o
o
c
c
a
a
t
t
i
i
o
o
n
n
s
s
In a non-redundant (i.e., single CMM) configuration, the CMM module can be installed in either Slot A or Slot B of the
chassis. In a redundant CMM configuration, a CMM module is installed in both Slot A and Slot B. Both non-redundant
and redundant CMM configurations can be performed on OS9700 and OS9800 switches.
Note. CMM redundancy is not supported on the OS9600 switch because it contains only one CMM slot.
Note that the CMM slots are longer than the Network Interface (NI) slots. These slots run vertically on the OS9700 and
OS9800 chassis and horizontally on the OS9600 chassis. They are located near the center of the chassis.
Refer to the figures below.
chassis. In a redundant CMM configuration, a CMM module is installed in both Slot A and Slot B. Both non-redundant
and redundant CMM configurations can be performed on OS9700 and OS9800 switches.
Note. CMM redundancy is not supported on the OS9600 switch because it contains only one CMM slot.
Note that the CMM slots are longer than the Network Interface (NI) slots. These slots run vertically on the OS9700 and
OS9800 chassis and horizontally on the OS9600 chassis. They are located near the center of the chassis.
Refer to the figures below.
OS9600/OS9700-CMM Versus OS9800-CMM
OS9600/OS9700-CMM and OS9800-CMM modules offer identical functions. In addition, OS9600/OS9700-CMM and
OS9800-CMM front panels provide the same port configurations and status LEDs.
However, there are two notable differences:
1 The physical dimensions of the OS9600/OS9700-CMM differ from those of the OS9800-CMM. As a result,
OS9600/OS9700-CMMs and OS9800-CMMs are not interchangeable between the 9600/9700 and 9800 chassis types.
2 OS9600/OS9700-CMMs and OS9800-CMMs use identical processor boards. However, OS9800-CMMs use twice the
number of network interface-related ASICs on the fabric board. This is because OmniSwitch 9800 switches support up to
16 network interface (NI) modules and OmniSwitch 9700 switches support up to 8 NI modules.
OS9800-CMM front panels provide the same port configurations and status LEDs.
However, there are two notable differences:
1 The physical dimensions of the OS9600/OS9700-CMM differ from those of the OS9800-CMM. As a result,
OS9600/OS9700-CMMs and OS9800-CMMs are not interchangeable between the 9600/9700 and 9800 chassis types.
2 OS9600/OS9700-CMMs and OS9800-CMMs use identical processor boards. However, OS9800-CMMs use twice the
number of network interface-related ASICs on the fabric board. This is because OmniSwitch 9800 switches support up to
16 network interface (NI) modules and OmniSwitch 9700 switches support up to 8 NI modules.
CMM Technical Specifications
Flash Memory
128MB
SIMM (DRAM) Memory
256MB
Console port
One RJ45 console/modem port; set to console by default
Ethernet management port (EMP)
10/100/1000Mbps speed
10/100/1000Mbps speed
One RJ45 port; provides out-of-band network management and can be used for Telnet sessions
or for downloading switch software via FTP
or for downloading switch software via FTP
USB port
USB 2.0 supported
(the USB 2.0 will be available in a future Release)
CMM Power Consumption
OS9600-CMM: 27watts
OS9700-CMM: 27watts
OS9800-CMM: 40watts
OS9700-CMM: 27watts
OS9800-CMM: 40watts