Alcatel-Lucent OS9-GNI-U24 사용자 설명서
Alcatel-Lucent
Page 26
OmniSwitch 9000
Cable distances
≈ 100m at 1000Mbps and full-duplex mode
SFP-DUAL-MM Technical Specifications
Features
Build-in PHY supporting SGMII Interface
Dual data-rate of 100BASE-FX/1000BASE-LX operation
1310nm FP laser and PIN photo-detector
0.5m~2km transmission with MMF at 125Mbps
0.5m~550m transmission with MMF at 1.25Gbps
Standard serial ID information compliable with SFP MSA
SFP MSA package with duplex LC connector
With Spring-Latch for high density application
Very low EMI and excellent ESD protection
+3.3V single power supply
Operating case temperature: 0 to +70°C
Dual data-rate of 100BASE-FX/1000BASE-LX operation
1310nm FP laser and PIN photo-detector
0.5m~2km transmission with MMF at 125Mbps
0.5m~550m transmission with MMF at 1.25Gbps
Standard serial ID information compliable with SFP MSA
SFP MSA package with duplex LC connector
With Spring-Latch for high density application
Very low EMI and excellent ESD protection
+3.3V single power supply
Operating case temperature: 0 to +70°C
Connector Type
The transceiver support LC connectors and are hot swappable
Supports the ability to mix and match SFPs on the same unit
Supports operation for layer-2, and layer-3 forwarding
Supports the ability to mix and match SFPs on the same unit
Supports operation for layer-2, and layer-3 forwarding
Standards supported
802.3z, and 100BASE-FX
Compliable with SFP MSA
Compliable with IEEE 802.3-2002
Compliable with IEEE 802.3ah-2004
Compliable with FCC 47 CFR Part 15, Class B
Compliable with FDA 21 CFR 1040.10 and 1040.11, Class I
Compliable with Telcordia GR-468-CORE
RoHS compliance
Compliable with SFP MSA
Compliable with IEEE 802.3-2002
Compliable with IEEE 802.3ah-2004
Compliable with FCC 47 CFR Part 15, Class B
Compliable with FDA 21 CFR 1040.10 and 1040.11, Class I
Compliable with Telcordia GR-468-CORE
RoHS compliance
Connections supported
1000BASE-LX or 100BASE-FX connections to backbone or server
Fiber optic cable supported
Multimode (MMF)
Wavelength
1310nm (typical)
1000BASE-LX
Transmitter Average Output Optical Power
Min: -11.5 dBm and Max: -3 dBm
Receiver Sensitivity
Min: 0 and Max: -22 dBm
Power Budget*
10.5 dBm ( 22 – 11.5 = 10.5 dBm)
100BASE-FX
Transmitter Average Output Optical Power
Min: -20.0 dBm and Max: -14.0 dBm
Receiver Sensitivity
Min: 0 and Max: -28 dBm
Power Budget*
8 dBm ( 28 – 20 = 8 dBm)
Cable distances**
550m at 1000Mbps and 2km at 100Mbps
SFP compatibility notes
This SFP is not supported on OmniSwitch 6850 combo ports with the exception of the
OmniSwitch 6850-U24X combo ports.
OmniSwitch 6850-U24X combo ports.
SFP-DUAL-SM10 Technical Specifications
Features
Build-in PHY supporting SGMII Interface
Dual data-rate of 100BASE-LX/1000BASE-LX operation
1310nm FP laser and PIN photo-detector
0.5m~10km transmission with SMF
Standard serial ID information compliable with SFP MSA
SFP MSA package with duplex LC connector
With Spring-Latch for high density application
Very low EMI and excellent ESD protection
+3.3V single power supply
Operating case temperature: 0 to +70°C
Dual data-rate of 100BASE-LX/1000BASE-LX operation
1310nm FP laser and PIN photo-detector
0.5m~10km transmission with SMF
Standard serial ID information compliable with SFP MSA
SFP MSA package with duplex LC connector
With Spring-Latch for high density application
Very low EMI and excellent ESD protection
+3.3V single power supply
Operating case temperature: 0 to +70°C
Connector Type
The transceiver support LC connectors and are hot swappable
Supports the ability to mix and match SFPs on the same unit
Supports operation for layer-2, and layer-3 forwarding
Supports the ability to mix and match SFPs on the same unit
Supports operation for layer-2, and layer-3 forwarding
Standards supported
IEEE 802.3z, 100BASE-FX, and 1000BASE-X
Compliable with SFP MSA
Compliable with IEEE 802.3-2002
Compliable with IEEE 802.3ah-2004
Compliable with FCC 47 CFR Part 15, Class B
Compliable with FDA 21 CFR 1040.10 and 1040.11, Class I
Compliable with Telcordia GR-468-CORE
RoHS compliance
Compliable with SFP MSA
Compliable with IEEE 802.3-2002
Compliable with IEEE 802.3ah-2004
Compliable with FCC 47 CFR Part 15, Class B
Compliable with FDA 21 CFR 1040.10 and 1040.11, Class I
Compliable with Telcordia GR-468-CORE
RoHS compliance
Connections supported
100BASE-LX or 1000BASE-X connections to backbone or server
Fiber optic cable supported
Single mode (SMF)
Wavelength
1310nm (typical)
1000BASE-LX