Tandberg Data SATA DLT-V4 Internal Grey 7301709300 사용자 설명서

Chapter 5  Using Data and Cleaning Cartridges

Data Cartridge Use and Care

DLT-V4 Product Manual

56

Figure 19  Unloading a DLTtape 
VS1 Data Cartridge from the 
Tape Drive

Remove the data cartridge from the tape drive.

Return the data cartridge to its plastic storage case to prolong data 

cartridge life.

5

All data cartridges have a write-protect switch to prevent accidental 

erasure of data. Before loading a data cartridge into your tape drive, 

make sure to position the write-protect switch on the front of the data 

cartridge as desired, as shown in 

.

• Write Protected — Slide the switch to the right to write-protect the 

data cartridge. A “locked” icon appears on the switch indicating that 

the data cartridge is write-protected.

• Write Enabled — Slide the switch to the left to allow your tape drive 

to write data to the data cartridge. The “unlocked” icon appears on 
the switch. The indicator on the top of the data cartridge also points 

to the appropriate icon, indicating the write-protected status. In 

addition, DLTtape IV cartridges are automatically write protected. 

DLTtape VS1 cartridges that have been pre-written in a DLT VS160 

are automatically write protected.