LANDE 12U 19'' LN-WM12U6060-CC-11 사용자 설명서
제품 코드
LN-WM12U6060-CC-11
ADDITIONAL FEATURES of Rear Section integrated
NETbox DOUBLE SECTION WALL MOUNTING
CABINETS:
The Feature of integration with Caster group or PVC adjustable
leveling feet group is applicable for double section wall mounting
cabinet if intended to use as free standing cabinet purposes.
Please see detailed description in accesorry section.
Part numbers to order:
*** LN-ZMN-TKR-5020-XX for Caster Group Set
LN-ZMN-PNY-1040-XX for PVC Leveling Feet Group Set
Once using the Lande NETbox double section wall cabinets for
Free standing purposes, and access from rear of the enclosure
could be managed by swinging capability of rear section.
Lande NETbox wall cabinets are being delivered with 1set: 2pcs
19’’ Rails.
Once a 4 point fixing shelf or any other 4 point fixing equipment
to be installed in double section wall mounting cabinets, an
additional set of 19’’ rails to be ordered. With this application it is
possible to locate some deeper networking devices as well some
heavy equipments like UPS’s etc.
Part numbers to order:
***LN-PRF-CMD-xx UD-ZN
Define xx as the U height of intended NETbox wall cabinet to be
used
Example Part Nr: LN-PRF-CMD-07UD-ZN
Please see detailed description in accesorry section.
NETbox Double Section cabinets has the same front door
variations like d:450 or d:600mm
NETbox Rear Section Module, can be swinging up to 102 degree
openning angle because of the wall to stop swinging capability,
which is the best performance in its segment. If cabinet is used as
free standing cabinet than 180 degree swinging is possible.
While cabinet is on wall a straight access could be managed to
enclosure in fully swing out position.
** Of course if the cabinet is assembled to a column or end of
wall , which the swinging capability has not been stopped by wall
or any other stopper, than can swing up to 180 degree.
DOUBLE SECTION OPENING ANGLE
0 -102
www.lande.com.tr
19” NETbox Double Section for
WA L L M O U N T I N G C A B I N E T S
20