Dynaudio Xeo 5 Set 605220 사용자 설명서
제품 코드
605220
Dynaudio International GmbH, Ohepark 2, 21224 Rosengarten, Germany, Phone +49 (0)4108 - 4180 - 0, Fax +49 (0)4108 - 4180 - 10,
WEEE-Reg.-Nr. DE 77987307, CEO: Wilfried Ehrenholz, Amtsgericht Tostedt HRB 3346, USt-IdNr. DE 114 960 879, St.-Nr. 15 200 40773,
info@dynaudio.com, www.dynaudio.com
When connected via USB, the Xeo Transmitter doesn't require use of the supplied external power adapter.
When connected to Toslink optical cable, or analogue via RCA Stereo cable or 3.5 mm Minijack cable, without any USB
connection, however, the Xeo Transmitter must be powered by the compact mains power adapter. A starter set of
compatible cables is also included.
Multi zone: Xeo is ready for multi-room/multi-zone installations
In addition to wireless operation, the Xeo system is also ready for multi-room/multi-zone installations. One single Xeo
Transmitter can also supply wireless sound to a second pair of Xeo loudspeakers in a second room, and to a third pair
of Xeo speakers in a third room. Since each speaker set includes its own remote control, each of these pairs of Xeo
loudspeakers is capable of wirelessly playing a separate source with independent volume control in each room or zone.
The Xeo remote control facilitates independently selecting the source input, setting the volume, or muting the sound (in
addition to powering the speakers on and off) for each set of speakers in each or any room. Similarly, multiple sets of Xeo
loudspeakers can be combined in one single room as well.
A simple example of a Xeo setup could be connecting the transmitter to the USB output of a Mac or PC, which thus would
power the transmitter. The only thing to do other than connecting the power cables to the Xeo loudspeakers is to select Left
or Right on the back panel of the corresponding speaker (both speakers can also be set to Mono). This is it. If additional
Xeo loudspeakers are to be used in different rooms on the same transmitter, a second small switch on the speaker’s back
panel defines the Xeo speaker as belonging to Room 1, Room 2 or Room 3.
Xeo is green: Highly energy efficient digital amplification and auto-standby function
Thanks to its advanced digital amplifier and sound processing, the Xeo Loudspeakers are much more energy efficient than
traditional amplifier/speaker combinations. Even when playing at high SPL levels, the speakers only need a few Watts,
while the Xeo Transmitter runs on a few Microwatts. When not in use, the Xeo speakers automatically switch off into
energy-saving standby-mode, consuming only 0.6 Watts.
Xeo product range
Xeo 3 Loudspeaker Pair, available in Piano Lacquer White or Piano Lacquer Black, incl. Remote Control
Xeo 5 Loudspeaker Pair, available in Piano Lacquer White or Piano Lacquer Black, incl. Remote Control
Xeo Transmitter
When connected to Toslink optical cable, or analogue via RCA Stereo cable or 3.5 mm Minijack cable, without any USB
connection, however, the Xeo Transmitter must be powered by the compact mains power adapter. A starter set of
compatible cables is also included.
Multi zone: Xeo is ready for multi-room/multi-zone installations
In addition to wireless operation, the Xeo system is also ready for multi-room/multi-zone installations. One single Xeo
Transmitter can also supply wireless sound to a second pair of Xeo loudspeakers in a second room, and to a third pair
of Xeo speakers in a third room. Since each speaker set includes its own remote control, each of these pairs of Xeo
loudspeakers is capable of wirelessly playing a separate source with independent volume control in each room or zone.
The Xeo remote control facilitates independently selecting the source input, setting the volume, or muting the sound (in
addition to powering the speakers on and off) for each set of speakers in each or any room. Similarly, multiple sets of Xeo
loudspeakers can be combined in one single room as well.
A simple example of a Xeo setup could be connecting the transmitter to the USB output of a Mac or PC, which thus would
power the transmitter. The only thing to do other than connecting the power cables to the Xeo loudspeakers is to select Left
or Right on the back panel of the corresponding speaker (both speakers can also be set to Mono). This is it. If additional
Xeo loudspeakers are to be used in different rooms on the same transmitter, a second small switch on the speaker’s back
panel defines the Xeo speaker as belonging to Room 1, Room 2 or Room 3.
Xeo is green: Highly energy efficient digital amplification and auto-standby function
Thanks to its advanced digital amplifier and sound processing, the Xeo Loudspeakers are much more energy efficient than
traditional amplifier/speaker combinations. Even when playing at high SPL levels, the speakers only need a few Watts,
while the Xeo Transmitter runs on a few Microwatts. When not in use, the Xeo speakers automatically switch off into
energy-saving standby-mode, consuming only 0.6 Watts.
Xeo product range
Xeo 3 Loudspeaker Pair, available in Piano Lacquer White or Piano Lacquer Black, incl. Remote Control
Xeo 5 Loudspeaker Pair, available in Piano Lacquer White or Piano Lacquer Black, incl. Remote Control
Xeo Transmitter
Available in Black, incl. power adapter and a set of interconnect cables
Xeo 3 Set
Pair of Xeo 3 Loudspeakers incl. Remote Control and one Xeo Transmitter
Xeo 5 Set
Pair of Xeo 3 Loudspeakers incl. Remote Control and one Xeo Transmitter
2/3