Gigaset C300H S30852-H2253-R701 사용자 설명서
제품 코드
S30852-H2253-R701
35
Troubleshooting
Gigaset C300H / USA EN / A31008-M2253-R301-2-3S19 / appendix.fm / 26.04.2011
V
e
rsion 4, 16.0
9
.2005
Troubleshooting
If you have any queries about the use of your
telephone, visit our website at
www.gigaset.com/service
for assistance 24/7.
telephone, visit our website at
www.gigaset.com/service
for assistance 24/7.
The table below contains a list of common
problems and possible solutions.
problems and possible solutions.
Protecting our
environment
environment
Our environmental mission
statement
statement
We, Gigaset Communications GmbH, bear
social responsibility and are actively com-
mitted to a better world. Our ideas, technol-
ogies and actions serve people, society and
the environment. The aim of our global
activity is to secure sustainable life resources
for humanity. We are committed to a respon-
sibility for our products that comprises their
entire life cycle. The environmental impact
of products, including their manufacture,
procurement, distribution, use, service and
disposal, are already evaluated during prod-
uct and process design.
social responsibility and are actively com-
mitted to a better world. Our ideas, technol-
ogies and actions serve people, society and
the environment. The aim of our global
activity is to secure sustainable life resources
for humanity. We are committed to a respon-
sibility for our products that comprises their
entire life cycle. The environmental impact
of products, including their manufacture,
procurement, distribution, use, service and
disposal, are already evaluated during prod-
uct and process design.
Further information on our environmentally
friendly products and processes is available
on the Internet at www.gigaset.com.
friendly products and processes is available
on the Internet at www.gigaset.com.
The display is blank.
1. The handset is not switched on.
¥ Press and hold the end call key a.
2. The battery is empty.
¥ Charge the battery or replace it
(
¢ page 10).
"Base"
flashes on the display.
1. The handset is outside the range of the base.
¥ Move the handset closer to the base.
2. The base's range is reduced because Eco Mode
is activated.
¥ Deactivate Eco Mode (¢ page 31) or
reduce the distance between the handset
and the base.
and the base.
3. The base is not switched on.
¥ Check the base power adapter.
4. Handset has not been registered with the base
or has been deregistered.
¥ Register the handset (¢ page 12).
Handset does not ring.
1. The ringer is deactivated.
¥ Activate the ringer (¢ page 34).
3. The phone only rings if the phone number has
been transferred.
¥ Activate the ringer for unknown calls
(
¢ page 34).
Each incoming call resets the date/time incor-
rectly.
rectly.
The date and time are sent through e.g., your net-
work provider or PBX during calling line display.
This data may be incorrect.
work provider or PBX during calling line display.
This data may be incorrect.
¥ Set the date/time correctly e.g., on the router
or PBX.
¥ Do not automatically copy the date/time
(dependent on base, refer to base user guide).
The other party cannot hear you.
You pressed the mute key
v during a call. The
handset is "muted."
¥ Unmute the microphone (¢ page 25).
The number of the caller is not displayed
despite Caller ID.
despite Caller ID.
Caller ID is not enabled.
¥ The caller should ask the network provider to
enable Caller ID (CID).
You hear an error tone when keying an input.
Action has failed/invalid input.
¥ Repeat the process.
Watch the display and refer to the user guide if
necessary.
necessary.
Exclusion of liability
Some displays may contain pixels (pic-
ture elements), which remain activated or
deactivated. As a pixel is made up of three
sub-pixels (red, green, blue), it is possible
that pixel colors may vary.
ture elements), which remain activated or
deactivated. As a pixel is made up of three
sub-pixels (red, green, blue), it is possible
that pixel colors may vary.
This is completely normal and does not
indicate an error.
indicate an error.