Netgear GS516TP GS516TP-100EUS 사용자 설명서

Insert the screws provided in the rack-mount kit through each bracket and into the bracket 

mounting holes in the switch. 

Tighten the screws with a No. 1 Phillips screwdriver to secure each bracket. 

Align the mounting holes in the brackets with the holes in the rack, and insert two pan-head 

screws with nylon washers through each bracket and into the rack. 

Tighten the screws with a No. 2 Phillips screwdriver to secure mounting brackets to the rack. 

Complete this task before applying power to the switch.



Inspect the equipment thoroughly.

Verify that all cables are installed correctly.

Check cable routing to make sure that cables are not damaged or creating a safety hazard.

Ensure that all equipment is mounted properly and securely.