Philips Anti-scale cartridge GC004/00 GC004/00 사용자 설명서

 3 

Take the ANTI-CALC cartridge out of its package (1) and pull the

rubber cap from its bottom (2). Place the ANTI-CALC cartridge in

the compartment and press it down until it locks into place (3). Then

close the ANTI-CALC cartridge compartment lid. 

 - Fill the water tank before every use or when the water level in the 

water tank drops below the minimum level. You can refill the water 

tank at any time during use.

 - Make sure you only use one of the 3 types of water mentioned below 

to fill the water tank: 

1  Tap water 

The ANTI-CALC cartridge filters scale particles from tap water. The scale 

content in the filtered water is regularly monitored by an electronic sensor. 

This sensor informs you when the cartridge needs to be replaced. 

2  Demineralised water

You can safely use demineralised water in your steam generator. Make sure 

that the ANTI-CALC cartridge is always in place, as the cartridge serves as 

a link between the water tank and the iron. When you use demineralised 

water, the ANTI-CALC cartridge is not used and therefore replacement of 

the cartridge is not necessary. 

3  Descaled water from the IronCare

The IronCare removes scale from tap water to ensure optimum 

performance for your iron. For more information, go to  

www.philips.com/ironcare. 
Caution: Do not use perfumed water, water from a tumble dryer, 

rainwater, vinegar, mineral water, magnetically treated water (Aqua+),

water from a drinking water filter, starch, descaling agents, ironing

aids, salt or chemicals in the water tank. These types of water have

been tested. They are not suitable and may even cause damage to the

appliance. If you use any of these types of water, your guarantee becomes 

invalid.

 1 

Open the filling funnel lid.

7