ZyXEL P-336M 802.11g Wireless MIMO Firewall Router 191000G0336M 사용자 설명서

ZyXEL P-336M User’s Guide

39

Chapter 3 Basic

If you want better WLAN security than WEP but do not have a RADIUS server on your 
network, select WPA-Personal in the Security Mode field in the Wireless screen. 

Figure 14   Basic: Wireless: WLAN Security Setup: WPA-Personal 

The following table describes the related labels in this screen. 

If you want better WLAN security than WEP and have a RADIUS server on your network, 
select WPA-Enterprise in the Security Mode field in the Wireless screen. 

Table 13   Basic: WLAN Security Setup: WPA-Personal

WPA

WPA Mode

Specify a WPA mode. Make sure the peer device(s) is also set to use the same 

WPA mode. 
Select WPA to set the P-336M to use WPA only. WPA is a older implementation 

than WPA2.
Select WPA2 to set the P-336M to use WPA2 first and then WPA if connection fails 

with WPA2. 
Select WPA2 Only to set the P-336M to use WPA2 only. 

Cipher Type

Specify the encryption mechanism. Select TKIP, AES or TKIP and AES. 

Group Key Update 

Interval

This is the rate at which an AP or RADIUS server sends a new group key out to all 

clients. The re-keying process is the WPA equivalent of automatically changing the 

WEP key for an AP and all stations in a WLAN on a periodic basis. 
Enter an update time in seconds. 

PRE SHARED 

KEY

Pre-Shared Key

Type a pre-shared key from 8 to 63 case-sensitive ASCII characters (including 

spaces and symbols).