Mitsubishi Electric LM55S1(W) LM55S1-2X2B 전단

Combine up to 25 panels (5 wide x 5 high) to create a single large video wall. 
The frame compensation function adjusts the image to compensate for the 
panel bezels to create an accurate image across multiple screens.

Frame Compensation Off

Frame Compensation On

Without color calibration

With color calibration

Utilizing Mitsubishi Electric's original color calibration software, the white
point, brightness and gamma curve can be adjusted to ensure matching 
images between adjacent panels.

- Open Pluggable Specification compatibility allows use of a 

personal computer card, 3G-SDI, etc., enabling a wider scope of applications.

 - Control commands can be sent from a 

computer through the LAN network to enable setting changes and remote 
diagnosis of multiple displays for efficient, centralized management.

 - Used with a DVI-D output terminal, daisy 

chain connection to multiple monitors (up to four) can be realized on a 
digital basis.

†

† Based on the following conditions: 1. When Power Save in the Configuration 1 menu is set to off; 2. 
The maximum number of connectable monitors may be limited depending on the signal source.

Commercial-grade LED-backlit panels with high brightness and contrast, 
and featuring a super-narrow 5.3mm bezel that minimizes image content 
loss, a critical factor in multi-screen applications.

By partially "dimming" the backlight, the local 
dimming function enhances the graphic 
contrast. Additionally, the power consumption 
is 30% less* when this function is on.

Local

Dimming

Off

Local

Dimming

On

Based on the following conditions: 1. Brightness is set to 100; 2. Broadcast contents (11.6) specified 
by IEC 62087 Ed. 2.0 are used as input signals; 3. Power supply is 100VAC; 4. No options are 
attached and speakers are set to off.

LCD MONITORS FOR

DISPLAY WALL SYSTEMS

MODEL