Avaya IPO R9 UPG SE ADI LIC 302260 사용자 설명서
![Avaya](https://files.manualsbrain.com/attachments/539de53b12b0cfce0bb8cf1e3bb961e969d9f556/common/fit/150/50/0bfb423b07b431ecf5ac095ccde7771f5eac50e962dfba59f8e256280b3d/brand_logo.png)
제품 코드
302260
Product Description
IP Office 9.0
IP Office 9.0
© 2014 AVAYA All rights reserved.
Page 48
Issue 27.02.0 (Monday, January 06, 2014)
Intercom Manual Dialing
Users can make an internal call to another extension by ringing it (dialing its extension number) or voice
signaling the extension by prefixing the extension number with a *.
signaling the extension by prefixing the extension number with a *.
Line Coverage Extension
Use this feature to identify an extension as the “owner” of a specific outside line, so the extension can activate
Call Coverage or VMS Cover for that line.
Call Coverage or VMS Cover for that line.
Line Ringing Options
This feature specifies the options: Immediate Ring, Delayed Ring or No Ring for incoming calls on a line
appearance programmed on the extension.
appearance programmed on the extension.
Log All Calls
Up to three extensions can be designated to log all calls, both answered and unanswered, regardless of where
they terminated in the system.
they terminated in the system.
Message Alert Notification
Message Alert Notification allows any ETR or Digital telephone, programmed with Auto Intercom buttons, to
see which users have new messages waiting in their mailbox.
see which users have new messages waiting in their mailbox.
When the Message Alert Notification button is pressed, the DSS/BLF buttons programmed on the user’s
telephone will display a flashing red LED when the associated user has new voice mails waiting.
telephone will display a flashing red LED when the associated user has new voice mails waiting.
This feature may be left on at all times or deactivated by pressing the Message Alert button again.
Music on Hold
Connect an audio source to the Music-On-Hold port on the processor module so that a caller hears music when
placed on hold when the Music-On-Hold feature has been activated.
placed on hold when the Music-On-Hold feature has been activated.
Network Time Synchronization
Use this feature to specify whether you want to synchronize the system clock with the network time delivered
by your service provider over Caller ID. If Network Time Synchronization is set to Active, the system will use
the network time provided by your service provider; if it is set to Not Active, the system will use the time
provided by its system clock.
by your service provider over Caller ID. If Network Time Synchronization is set to Active, the system will use
the network time provided by your service provider; if it is set to Not Active, the system will use the time
provided by its system clock.
Night Service
When Night Service is on and a call comes in, all extensions in the Night Service Group ring immediately,
regardless of normal Line Ringing settings.
regardless of normal Line Ringing settings.
One-Touch Transfer
This feature allows a user to automatically transfer a connected call with one-touch -- by pressing a pre-
programmed Auto Dial Intercom for the destination extension. (The Transfer button is not used.)
programmed Auto Dial Intercom for the destination extension. (The Transfer button is not used.)
·
The transfer is completed when the transferring station goes on-hook, or touches the Transfer button
or Complete soft-key.
or Complete soft-key.
·
The user initiating the transfer is able to consult and complete the transfer or blind transfer after
successfully initiating a one-touch transfer.
successfully initiating a one-touch transfer.
The LEDs at the phone initiating the transfer, as well as other appearances of the call in the system, behave
the same as if the user touched the Transfer button to initiate the transfer.
the same as if the user touched the Transfer button to initiate the transfer.