Avaya IPO R9 IP500 T1 ADD 8CH PLDS LIC 273923 사용자 설명서
제품 코드
273923
Product Description
IP Office 9.0
IP Office 9.0
© 2014 AVAYA All rights reserved.
Page 109
Issue 27.02.0 (Monday, January 06, 2014)
External Expansion Modules
Each of these modules may be used with the IP500
·
Available in two variants for 16 or 30 analog extensions with calling line presentation.
·
Available in three variants for 16 or 30 digital extensions.
·
(US version only)
Provides 16 analog loop start or ground start trunks, with power failover of two trunks.
IP500 Analog Phone Expansion Module
The IP500 module provides additional analog telephone interfaces:
·
Two Wire.
·
DTMF signaling (No rotary or Loop Disconnect).
·
Time Break Recall (No Earth Recall).
·
Message Waiting Indication (MWI) capable - High Voltage, Pulsed High Voltage, Line Reversal.
IP Office Phone Modules provide support for a variety of analog MWI methods. These methods are 51V
Stepped, 81V, 101V and Line Reversal.
Stepped, 81V, 101V and Line Reversal.
Each analog port can support a device of maximum 1 REN.
On analog ports, call information is sent while the phone is ringing, and cannot be updated during a call or set
on an outbound call (the phone may do a local match but this is not controlled by the IP Office). The primary
purpose of displays is to give information about incoming calls. Where the Caller Display standard chosen
supports the delivery of text (extension name) as well as the number, both are delivered.
on an outbound call (the phone may do a local match but this is not controlled by the IP Office). The primary
purpose of displays is to give information about incoming calls. Where the Caller Display standard chosen
supports the delivery of text (extension name) as well as the number, both are delivered.
An analog extension port can be set for external Paging operation. It does not operate like a normal extension
and is connected to external equipment through an isolation device. The Port will always be busy so it cannot
be called directly and can only be accessed by using a paging feature. When not receiving a Page, the port will
remain silent. When being paged, the page tone is sent before the speech path is opened.
and is connected to external equipment through an isolation device. The Port will always be busy so it cannot
be called directly and can only be accessed by using a paging feature. When not receiving a Page, the port will
remain silent. When being paged, the page tone is sent before the speech path is opened.
109
110
112