Bosch ISC-BPR2 F.01U.134.143 사용자 설명서
제품 코드
F.01U.134.143
Sealed Optics and Electronics
The optics and electronics are assembled into the
front enclosure and sealed with a protective cover to
prevent damage during installation. The sealed optical
chamber also prevents drafts and insects from
affecting the detector.
front enclosure and sealed with a protective cover to
prevent damage during installation. The sealed optical
chamber also prevents drafts and insects from
affecting the detector.
Test Features
Externally visible alarm LED can be disabled after
installation.
installation.
Certifications and approvals
These detectors are also designed to comply with the following:
Europe
Complies with EN50131-2-2 Grade 2
Complies with EN50130-5 Class II
Complies with EN60529, EN50102 (IP30, IK04)
Complies with Directive 2002/95/EC - Restriction of the
use of certain Hazardous Substances (RoHS)
China
Complies with CCC GB10408.1 and GB10408.5
Region
Certification
Europe
CE
2004/108/EC: EMC Directive and
2006/95/EC: Low-Voltage Directive;
2011/65/EU Restriction of the use of
certain hazardous substances in electri-
cal and electronic equipment
EN5013
1
EN50131-2-2 [-W12]
EN5013
1
EN50131-2-2 [-WP12]
Belgium
INCERT
B-509-0051/d [ISC-BPR2-W12, -
WP12; ISC-BPQ2-W12]
USA
UL
cULs - ANSR: Intrusion-detection Units
(UL 639), ANSR7: Intrusion-detection
Units Certified for Canada (ULC-S306)
[-W12 and -WP12]
France
AFNOR
2620200001A0 [-W12]
AFNOR
2620200001B0 [-WP12]
China
CCC
2010031901000322 [-CHI]
Sweden
INTYG
11-268 [-WP12]
INTYG
11-269 [-W12]
the Nether-
lands
NCP
2011062 [ISC-BPR2-w12, -WP12, ISC-
BPQ2-W12, ISC-BDL2-W12G, ISC-
BDL2-WP12G, ISC-BDL2-WP6G]]
Bulgaria
GD
FSPP
GODKJENNELSESBEVIS [-W12, -WP12]
Installation/configuration notes
Coverage Patterns
12 m x 12 m (40 ft x 40 ft) coverage
Mounting
The recommended mounting height is 2.2 m to 2.75 m
(7.5 ft to 9 ft) with no adjustments required.
The detector can be mounted:
(7.5 ft to 9 ft) with no adjustments required.
The detector can be mounted:
• On a flat wall (surface, semi-flush), with the optional
B335 Swivel-mount Bracket, or with the optional
B328 Gimbal-mount Bracket.
B328 Gimbal-mount Bracket.
• In a corner (the junction of two perpendicular walls).
• On the ceiling with the optional B338 Ceiling-mount
• On the ceiling with the optional B338 Ceiling-mount
Bracket.
Parts included
Quant.
Component
1
Detector
1
Hardware pack
• 2 anchors (#6, #8 x 7/8)
• 2 screws( #6 x 1.25)
• 1 cable tie (2.5 mm)
1
Literature - Installation Guide
2 | ISC-BPR2 - Blue Line Gen2 PIR Motion Detectors