Bosch DS484Q 사용자 설명서
Certifications and approvals
Region
Certification
Europe
CE
89/336/EEC, EN55022: 1998,
EN50130-4: 1995 +A1: 1998 +A2:
2003, EN61000-3-2: 2000,
EN61000-3-3: 1995, EN61000-4-2:
1995 +A1: 1998 +A2: 2001,
EN61000-4-3: 1996 +A1: 1998 +A2:
2001, EN61000-4-4: 1995 +A1: 2001,
EN61000-4-5: 1995 +A1: 2001,
EN61000-4-11: 1994, ENV50141:
1993
USA
UL
ANSR: Intrusion Detection Units
(UL639)
Installation/configuration notes
Mounting Considerations
Mount these detectors on solid vibration free surfaces
or poles.
or poles.
Technical specifications
Photobeam
Selectable Beams:
Two groups by four channels
Maximum Outdoor
Coverage
DS484Q:
120 m (400 ft)
Maximum Outdoor
Coverage
DS486Q:
200 m (660 ft)
Response Time:
Selectable response time of 35 ms to 700 ms
Beam Interrupt
Time:
Adjustable from 50 ms to 500 ms
Enclosure Design
Material:
Polycarbonate
Dimensions:
398 mm x 103 mm x 99 mm
(15.67 in. x 4.06 in. x 3.90 in.)
Receiver Weight:
1.2 kg (2.64 lb)
Transmitter
Weight:
1.2 kg (2.64 lb)
Environmental Considerations
Operating
Temperature:
-25° C to + 55° C (-13°F to + 130° F)
IP Rating:
IP 54 (protection against dust; protection against
splashing water)
Mounting Considerations
Location:
Surface or pole mount
Pattern
Pointability:
±90° horizontal, ±10° vertical
Power Requirements
Voltage:
10.5 VDC to 28 VDC non-polarized
Receiver Current
Draw:
80 mA standby, 50 mA alarm
DS484Q
Transmitter
Current Draw:
35 mA
DS486Q
Transmitter
Current Draw:
55 mA
Backup Power
Requirements:
4 hours (120 mAh) minimum required for UL
Certificated Installations
Tamper Output:
Normally-closed contacts rated at 0.1 A at
30 VDC
Alarm Output:
Form C 0.2 A at 30 VDC, output period: 3 sec
EDC Output:
Normally-closed 0.2 A at 30 VDC, output period:
3 sec
Tamper Output:
Normally-closed 0.1 A at 30 VDC, output period:
while cover is removed
Environmental
Discrimination
Circuit Output:
Normally-closed contacts rated at 0.2 A at 30
VDC
Ordering information
DS484Q Photoelectric Detector
Provides an outdoor range of 120 m (400 ft).
Order number
Provides an outdoor range of 120 m (400 ft).
Order number
DS484Q
DS486Q Photoelectric Detector
Provides an outdoor range of 200 m (660 ft).
Order number
Provides an outdoor range of 200 m (660 ft).
Order number
DS486Q
Accessories
MP1 Metal Pole, 1 m (3 ft)
Straight metal poles measuring 1 m (3 ft) for pole
mounting photoelectric detectors. Shipped in
packages of two.
Order number
MP1 Metal Pole, 1 m (3 ft)
Straight metal poles measuring 1 m (3 ft) for pole
mounting photoelectric detectors. Shipped in
packages of two.
Order number
MP1
MP2 Metal Pole, 1.2 m (4 ft)
Straight metal poles measuring 1.2 m (4 ft) for pole
mounting photoelectric detectors. Shipped in
packages of two.
Order number
Straight metal poles measuring 1.2 m (4 ft) for pole
mounting photoelectric detectors. Shipped in
packages of two.
Order number
MP2
MP3 L‑Curved Metal Pole
Curved metal poles for mounting to vertical surfaces
for pole mounting photoelectric detectors. Shipped in
packages of two.
Order number
Curved metal poles for mounting to vertical surfaces
for pole mounting photoelectric detectors. Shipped in
packages of two.
Order number
MP3
PC1A Weather Enclosure
Protects detectors when mounted outside. The
enclosure’s dimensions are 39.4 cm x 10.3 cm x 6 cm
(15.5 in. x 4 in. x 2.4 in.). Shipped in packages of two.
Order number
Protects detectors when mounted outside. The
enclosure’s dimensions are 39.4 cm x 10.3 cm x 6 cm
(15.5 in. x 4 in. x 2.4 in.). Shipped in packages of two.
Order number
PC1A
2 | DS484Q and DS486Q Quad‑Beam Photoelectric Detectors