StarTech.com 16 Port StarView USB+PS2 KVM switch with OSD SV1631HDGB 사용자 설명서
제품 코드
SV1631HDGB
4
Operating Your KVM Switch
To toggle between computers, you can use the hot-key commands, OSD (On-Screen Display) menu or by
using the pushbuttons.
using the pushbuttons.
Push Buttons
The LEDs on the KVM switch indicate which computers are turned on (solid green) and which computer is
selected (solid red). The indicator flashes red when in Auto or Manual Scan mode. You can press any of the
corresponding pushbuttons to select the active computer. On the 16 port models, Port 1 and Port A share
the same pushbutton, as do Port 2 and Port B, etc. To select Ports 1 through 8, press the pushbutton once.
To select Ports A through H, press and hold the pushbutton for two seconds. Alternatively, if Port 1 is
currently selected and you want to select Port A, you can press the pushbutton once to switch to Port A.
selected (solid red). The indicator flashes red when in Auto or Manual Scan mode. You can press any of the
corresponding pushbuttons to select the active computer. On the 16 port models, Port 1 and Port A share
the same pushbutton, as do Port 2 and Port B, etc. To select Ports 1 through 8, press the pushbutton once.
To select Ports A through H, press and hold the pushbutton for two seconds. Alternatively, if Port 1 is
currently selected and you want to select Port A, you can press the pushbutton once to switch to Port A.
The K/M Reset function reconfigures your system without powering down your computers or your KVM
switch. To reset the switch, press and hold the front-panel 1 and 2 buttons simultaneously.
switch. To reset the switch, press and hold the front-panel 1 and 2 buttons simultaneously.
The Auto-Scan function automatically scrolls through your connected computers. Press and hold the front-
panel 7 and 8 buttons simultaneously to enter Auto Scan mode.
panel 7 and 8 buttons simultaneously to enter Auto Scan mode.
OSD Operations
By hitting the left <CTRL> key twice within two seconds, you may see the 'Hotkey Menu' if it is enabled
(an OSD option). Or, by hitting the left <CTRL> key three times within two seconds, you will see a 'KVM
MENU' screen (below) showing a list of the computers with corresponding channel addresses, names and
status.
(an OSD option). Or, by hitting the left <CTRL> key three times within two seconds, you will see a 'KVM
MENU' screen (below) showing a list of the computers with corresponding channel addresses, names and
status.