StarTech.com 16 Port StarView USB+PS2 KVM switch with OSD SV1631HDGB 사용자 설명서
제품 코드
SV1631HDGB
8
Hot Key Commands
A hot key command is a short keyboard sequence to select a computer, activate a computer scan, etc. A
hot-key sequence starts with two Left Control keystrokes followed by one or two more keystrokes. A
built-in buzzer generates a high-pitched beep for correct hot-key sequences and a low-pitched beep for
errors or bad key combinations that will not be carried out.
hot-key sequence starts with two Left Control keystrokes followed by one or two more keystrokes. A
built-in buzzer generates a high-pitched beep for correct hot-key sequences and a low-pitched beep for
errors or bad key combinations that will not be carried out.
The short form hot-key menu can be turned on as an OSD function (<F4>: More\Hotkey Menu) every time
the left <CTRL> key is pressed twice.
the left <CTRL> key is pressed twice.
•
Left Ctrl refers to the <CTRL> key located at the left side of the keyboard.
•
1~8/A~H refer to the number keys 1 to 8 at the upper row of the keyboard (Do not use the keypad at
the right of the keyboard) and character keys A to H (case insensitive).
the right of the keyboard) and character keys A to H (case insensitive).
Selecting a Computer
To select a computer by hot-key command you need to know the device’s channel address, which is
determined by the StarView connection.
•
To select a computer by hot-key command you need to know the device’s channel address, which is
determined by the StarView connection.
•
For a computer connected to a Master KVM, the address is represented by the PC port number (1~8 or
A~H). For example, to access the PC plugged into port 7 of the Master KVM switch, type:
A~H). For example, to access the PC plugged into port 7 of the Master KVM switch, type:
left Ctrl + left Ctrl + 7
•
For a computer connected to a Slave KVM, you need to know the channel address of the Slave unit
(1~8) and then the channel address of the device (1~8 or A~H). (Please note that only Master's PC 1 to
PC 8 ports can be connected to a Slave.) For example, to access the computer plugged into port C of
the Slave KVM Switch that is plugged into Port 6 of the Master KVM, type:
(1~8) and then the channel address of the device (1~8 or A~H). (Please note that only Master's PC 1 to
PC 8 ports can be connected to a Slave.) For example, to access the computer plugged into port C of
the Slave KVM Switch that is plugged into Port 6 of the Master KVM, type:
left Ctrl + left Ctrl + 6 + C
Auto Scan
Auto Scan automatically scans through power-on computers at a fixed interval:
Auto Scan automatically scans through power-on computers at a fixed interval:
left Ctrl + left Ctrl + F1
When Auto Scan detects any keyboard or mouse activity, it suspends the scanning until activity stops; it
then resumes with the next computer in sequence. The length of the Auto Scan interval (Scan Rate) is
adjustable (see Scan Rate on the following page). To abort the Auto Scan mode, press the left Ctrl key
twice.
then resumes with the next computer in sequence. The length of the Auto Scan interval (Scan Rate) is
adjustable (see Scan Rate on the following page). To abort the Auto Scan mode, press the left Ctrl key
twice.
Note: Scan Type (See “OSD Function Keys: F4”) determines whether eye mark is necessary during Auto
Scan.
Scan.
Manual Scan
Manual Scan enables you to manually switch back and forth between power-on computers:
Manual Scan enables you to manually switch back and forth between power-on computers:
left Ctrl + left Ctrl + F2
Press the up or down arrow to select the previous or next computer in sequence. Press any other key to
abort the Manual Scan.
abort the Manual Scan.
Note: Scan Type (See “OSD Function Keys: F4”) determines whether eye mark is necessary during Manual
Scan.
Scan.