Fujitsu MAT3300FC 사용자 설명서
Command Specifications
4-130
C141-C008
4.1.19 REPORT LUNS (A0)
Bit
Byte
Byte
7 6 5 4 3 2 1 0
0 X'A0'
1
0 0 0 0 0 0 0
0
2
0 0 0 0 0 0 0
0
3
0 0 0 0 0 0 0
0
4
0 0 0 0 0 0 0
0
5
0 0 0 0 0 0 0
0
6
Allocation Length (MSB)
7 Allocation
Length
8 Allocation
Length
9
Allocation Length (LSB)
10
0 0 0 0 0 0 0
0
11 0 0
0 0 0
0
0
0
This command requests that the peripheral device logical unit inventory be sent to
the application client.
the application client.
This command normally operate under the reserve condition (RESERVE or
PERSISTENT RESERVE).
PERSISTENT RESERVE).
The "Allocation Length" should be at least 16 bytes. If the "Allocation Length" is
less than 16 bytes, the IDD reports the CHECK CONDITION status (ILLEGAL
REQUEST [=5] / Invalid Field in CDB [=24-00]). If the "Allocation Length" is
not sufficient to contain the entire logical unit inventory, the device server shall
report as many logical unit number values as fit in the specified allocation length.
This shall not be considered an error.
less than 16 bytes, the IDD reports the CHECK CONDITION status (ILLEGAL
REQUEST [=5] / Invalid Field in CDB [=24-00]). If the "Allocation Length" is
not sufficient to contain the entire logical unit inventory, the device server shall
report as many logical unit number values as fit in the specified allocation length.
This shall not be considered an error.
The device server shall report those devices in the logical unit inventory using the
format shown in Table 4.91.
format shown in Table 4.91.